Our new Web Gallery will be a place where we will regularly showcase some of the incredible work that our customers are creating with our products. We are always excited to see what everyone is making and hope that you will be too. Please check our site periodically for new postings.

You may get some inspiration. What will you make?

P.S. We would love for you to tell us what you are making! Send us an email and let us know!

Leslie Molen is a nationally recognized doll artist based in Denver, CO. She has exhibited her one-of-a-kind work in galleries and museums around the world.

Little Blossoms in Red, and Little Blossoms in Lavender, by Leslie Molen. Mold of original clay head with Knead-a-Mold, silicone putty. The “Heads in a row” show from original, molded, and the finished product.

To make the finely detailed heads of her intricate elves, she pours the heads in Clay-Shay (available at AVES) which she covers with cloth. Leslie then makes a mold of the cloth covered clay head with Knead-a-Mold.“I appreciate that the Knead-a- Mold picks up such fine detail that I can still cover the head in fabric and that detail still shows through!” she says.

For more information about Leslie and her work, visit www.rootie.com
To view all of Townsend Atelier products, click here

Britain used several Townsend Atelier products. To make the hands that support the violin, Britain used Brush-a-Mold to make a mold from her own hands. She then poured Townsend Casting Resin into the cured molds and painted the resin hands with acrylic paint.

As for the inspiration for her piece, Britain says, “Think of about the last movement of some of Beethoven’s symphonies–when the violins are playing away furiously. In my mind’s eye, I see them exploding with the music from the inside in a Crescendo.”

“Crescendo” by Judith Britain 32″ H, violin, mylar, wood, acrylic paste, resin.

To view more of Britain’s work, visit www.judybritain.com
To view a complete catalogue of all Townsend Atelier molding, casting + patina products, CLICK HERE

1. First, the 7 year old artist sculpted his rabbit in ordinary clay. Any type of clay or even play-dough can be used EXCEPT sulfur based clays. The sulfur in the clay will not allow the silicone mold material to cure properly. Once he was happy with his clay sculpture, it was ready to be molded. The next steps were done by an adult.
2. Next, his dad applied several layers of Brush-a-Mold to the clay sculpture. It is not necessary to fire the clay or to let it dry before this process. Several layers of Brush-a-Mold are needed–it is recommended that at least a 1/4 inch thickness is achieved. For directions for Brush-a-Mold click here.
3. After the Brush-a-Mold was fully cured, the flexible mold was pulled off of the clay piece. The clay was wadded up to be re-used for another project.
4. Next, a generous dusting of bronze powder was put inside the mold. A small dry brush can be used to make sure that the powder adheres inside every nook and cranny. To see more instruction about bronze powder click here.
5. Townsend Casting Resin was mixed and poured into the mold and allowed to cure (about 16-20 minutes). Before fully cured, a threaded bolt was placed in the bottom so that a permanent device would be embedded for mounting the sculpture later.
6. When resin was fully cured, it was pulled out of the mold. The bronze powder that was dusted in the walls of the mold adhere permanently to the exterior of the sculpture and can be patina or buffed up with steel wool to make it shine like bronze.

De-molded sculpture with mounting device embedded in resin.

De-molded sculpture showing bottom with mounting device in white resin and bronze exterior.

We then drilled a hole in a pre-made wooden base (purchased at any hobby or hardware store), and screwed in the bolted sculpture.

The “real” Spinner checking out the sculpture.

To see and read more about this exhibition, click this link: river-of-secrets.pdf

To make the molds for the cast pewter hands, Greeland applied Brush-a-Mold on to his own hands then after allowing to cure, he demolded the mold from his hands and cast pewter into them. He also used Brush-a-Mold to make the molds for the cast brass animal heads.

Cast Pewter in a Brush-a-Mold mold

Cast Brass

To make the hoofs, molds were made from real deer hoofs with Brush-a-Mold and then cast in plaster.

Cast plaster hoofs

To view all of Townsend Atelier products, click here